Industrial Tunnel Microwave Dryer

Industrial Tunnel Microwave Dryer enables continuous drying production, mainly for products with low water content and fast drying. The dryer length and power are determined by the dry yield. Power can be customized from 15 kW to 200 kW. In particular, the Industrial Tunnel Microwave Dryer is suitable for drying products with a water content below 30%. Products with too high moisture need to focus on drying costs.

Industrial microwave systems are industrial microwave machines that are mainly used in industrial production. The microwave magnetron is used to convert electrical energy into microwave energy, and the microwave material is used for penetrating heating of the medium material laid on the conveyor belt, and the temperature of the material is raised in a short time, so that the moisture content of the material is rapidly lowered to the user. Process requirements.

Microwave oven industrial heating has timing function, temperature setting function, temperature control microwave source function, frequency conversion speed control conveyor belt function, microwave segmentation adjustment and other functions, PLC automatic control is Mitsubishi PLC or Siemens PLC, manual function and automatic function , can be requested by the user, sequential control or interpolated control or cycle control or intermittent control, and finally meet the process requirements of material production.
The industrial continuous microwave oven enables continuous drying production, mainly for products with low water content and fast drying. The dryer length and power are determined by the dry yield. The power can be customized from 15 kW to 200 kW. The tunnel microwave dryer design scheme is provided according to the different requirements of users. It will give you a detailed introduction to the working principle, power and technical parameters of the tunnel microwave dryer, and the latest pictures of industrial microwave oven manufacturers. Price / Quote, contact us factory
Industrial Tunnel Microwave Dryer Specifications
1. Input power: three-phase five-wire 380V±10% 50Hz±1%
2. Microwave output power: 30kW (adjustable)
3, microwave frequency: 2450MHz ± 50Hz
4, rated input apparent power: ≤ 45kVA
5, the height of the inlet and outlet: 50mm
6, conveyor belt width: 650mm
7, transmission speed: 0.1 ~ 5m / min
8. Dimensions (length × width × height): about 11630 × 1310 × 1668mm
9, working environment: 0 ~ 40 ° C, relative humidity ≤ 80%
10, microwave machine output: dry dehydration 30kg per hour
11, in line with GB 10436-1989 workplace microwave radiation health standards
12, in line with GB/5226.1-2002 mechanical safety mechanical and electrical equipment

First, the characteristics of Industrial Tunnel Microwave Dryer:
1: Industrial Tunnel Microwave Dryer drying speed
Good equipment performance is the basis for wood drying and is a prerequisite for performing the drying process. Wood microwave drying room has different characteristics from ordinary drying. The heat is not the surface conduction of the object, and the microwave is directly heated by the water content of the material and the wood itself. The microwave is the direct microwave and the dried product. Interaction, the permeability of microwave energy causes the inside and outside of the object to heat at the same time, the internal moisture is rapidly vaporized, and the powerful "pressure pad" of outward diffusion forces the internal water to quickly disperse outward, thus speeding up the drying speed.
2: Industrial Tunnel Microwave Dryer is highly efficient
The process of using traditional drying often lasts for days or even days. The microwave wood drying takes only a few tens of minutes, and the drying time is greatly reduced. Generally, when the wood is treated, the water lifting rate standard is used as the evaluation standard. Because the tree species and the wood hardness are different, the wood after microwave drying is used. The water content is uniform. Dry the wood with microwaves without heating. And get a good drying effect.
3: Industrial Tunnel Microwave Dryer is of good quality
Industrial Tunnel Microwave Dryer has strong permeability and heating selectivity when drying wood. Therefore, the fiber shrinkage is consistent between the inner and outer ends of the wood during the drying process, so the cracking and deformation of the wood is small. Dry wood is uniform, does not deform, and does not crack. Because the microwave acts on both the inner and outer parts of the wood, the heat is even, so the microwave treated wood is evenly and thoroughly dried, improving the product quality, the surface will not be knotted, the toughness is improved, the cracking, deformation, discoloration, and correctable bending are guaranteed. Degree and so on. However, the traditional drying method will be deformed, cracked, mildewed, deteriorated, etc., which seriously affects the quality of the wood and causes a large amount of wood to be scrapped. Drying wood with Industrial Tunnel Microwave Dryer can increase wood utilization by about 10%. Microwave has a strong penetrating ability to wood. It has nothing to do with the shape and size of wood, and overcomes the external heat and internal cooling phenomenon caused by traditional heating and drying.
4: Industrial Tunnel Microwave Dryer kills harmful insects
Microwave drying of wood while killing harmful insects is due to the strong resonance effect of microwave electromagnetic field energy and water molecules in wood. Anti-mite, anti-mildew, and extended shelf life. Microwave drying wood can penetrate the interior of the wood and use the parasitic eggs in the wood to kill quickly, which can prevent cockroaches, mildew and prolong the shelf life. The harmful aphids and larvae inside the wood were all killed at the same time, and the treatment temperature was only a few minutes at 70-80 degrees.
5: Energy saving, saving floor space and improving working conditions
Industrial Tunnel Microwave Dryer directly works on the corresponding materials, so there is no additional heat loss. The air in the cavity and the corresponding container have to be heated, so the efficiency is improved and the production environment is obviously improved. Wood drying with far-infrared and steam energy sources has an energy utilization rate of less than 50%, while microwave utilization as an energy source can reach more than 85%, which is about 30% lower than that of far-infrared and steam drying. It is heated and dried with traditional steam and heated by hot water. Hot oil heating and drying, furnace gas indirect heating and drying, heat pump dehumidification and drying wood can save energy by 30%, thus reducing production costs. The equipment has a small footprint (about a dozen square meters) while saving production and processing sites.
6: Industrial Tunnel Microwave Dryer is easy to control and advanced
Compared with the traditional method, the device can be used immediately, without thermal inertia, and the operation is flexible and convenient. Each equipment can be produced with 2 workers, which saves the production labor microwave power and adjustable transmission speed. It is a safe and reliable high-tech product.
7. Industrial Tunnel Microwave Dryer is safe, hygienic, noise-free and pollution-free.